 |
|
Cameras for Sprayers, Tractors and Combines |
|
4-Series Sprayers You can use Voyager cameras, cables and a special adapter harness on the 4–Series Sprayers with GreenStar™ 3 (GS3) 2630 Displays for those who want more visibility when operating the 4-Series Sprayers. The GS3 2630 Display has two video inputs that comes pre-wired from the factory and can be attached to the Voyager camera wiring via an adapter harness (SWTY26989) with the capabilities of having up to two cameras installed. The camera system can be viewed while operating the machine. |
|||||||
|
Cab plug-in |
Full cab view of plug-in |
||||||
|
Note: Video triggers can be activated using the GS3 2630 Display. |
|
Camera display triggers |
||||||||||||||||||||||||
|
|
Parts for 4-Series Sprayers |
|||||
|
Voyager Camera with mounting bracket |
SWCEC25 – 25-ft extension SWCEC50 – 50-ft extension |
Adapter harness |
|||
|
6R Series Tractors 6R Series equipped with the touch-screen CommandCenter have “video capability” built in. A Voyager camera and special adapter harness can be used on the 6R Series Tractors that are equipped with the touch-screen CommandCenter. These 6R units can utilize one video input for operators who want more visibility when operating large machinery. |
|||||||
|
CommandCenter monitor equipped on 6R Tractors CommandCenter display w/Voyager camera |
Visual on the touch screen |
||||||
|
When operators use the touch-screen CommandCenter for video capability, they can set the video to a mirror on/off. Mirror on will flip the view right for left, and mirror off will show the image captured. The operator also has the ability to set a variety of triggers, including reverse, PTO, hitch and SCV levers to activate the camera. In addition, the amount of time that the video is activated can be set from the CommandCenter from 5 to 60 seconds. |
|
Parts for 6R Series Tractors (CommandCenter used as video display) |
|||||||||||
|
SWVCMS155B Voyager Camera with mounting bracket |
SWTY27027 6R Camera Harness Kit (includes harness, mounting bracket, and hardware) |
SWTY227028 Implement Camera Harness (the harness for the implement that plugs into tractor); included in kit. Used for multiple implements on the same tractor |
|||||||||
|
Harness plugged into the cab |
Harness attached to the back of tractor |
|
7R, 8R, 8RT, 9R and 9RT Series Tractors 7R, 8R, 8RT, 9R and 9RT Series Tractors equipped with the touch-screen CommandCenter and the GS3 2630 Display have “video capability” built in. You can use Voyager cameras, cables and a special adapter harness on these tractors that are equipped with the touch-screen CommandCenter and GS3 2630 Display. These units can utilize one video input for operators who want more visibility when operating large machinery. |
|||||||
|
CommandCenter monitor |
Visual on the touch-screen |
||||||
|
Customers can use the touch-screen CommandCenter for video capability. |
|
Parts for 7R, 8R, 8RT, 9R and 9RT Tractors (CommandCenter used as video display) |
|||||||||||
|
SWVCMS155B Voyager Camera with mounting bracket |
SWCEC25 25-ft extension |
SWTY26834 Adapter harness |
|||||||||
|
Customers can use the GS3 2630 as a video display. |
|
GS3 2630 video display · The same camera and cable will work but a different adapter harness is needed · Allows one video input for those wanting more visibility when operating large machinery; video can be viewed while operating machinery · National Television System Committee (NTSC) is the North American standard for all cameras |
|
|
Parts for 7R, 8R, 8RT, 9R and 9RT Tractors (GS3 used as video display) |
||||||||
|
Voyager Camera with mounting bracket |
SWCEC25 25-ft extension |
SWTY26845 GreenStar adapter harness |
||||||
|
S-Series Combines The S-Series Combines have “video capability” built in including a new feature called the video trigger. One trigger is available on S-Series Combines which would automatically display when that trigger is activated. |
|||
|
|
|
OPTION 1: CommandCenter or GS3 2630 Display Use the touch screen CommandCenter or GS3 2630 GreenStar Display as a video display: You can use Voyager cameras, cables, and a special adapter harness on the S–Series Combines with either the touch screen Command Center or GS3 2630 Display or both (GS3 2630 Display at corner post location) for those who want more visibility when operating the S-Series Combines. Each display has one video input that is pre-wired that can be attached to the Voyager camera wiring via an adapter harness SWTY26834. The S–Series Combines can have up to two cameras installed (one for Command Center and one for the GS3 2630 Displays). Suggested camera locations for one or two camera systems are the unloading auger and either the rear engine wall or the grain tank. |
|||||||
|
|
|
||||||
|
Parts for S-Series Combines (CommandCenter or GS3 used as video display) |
|||||
|
Voyager Camera with mounting bracket |
|
SWTY26834 Adapter harness |
|||
|
OPTION 2: GS3 2630 Display Use the GS3 2630 Display as a video display: The GS3 2630 Display allows up to three video inputs. The video can be viewed while operating machinery directly on the GS3 2630 Display. The same Voyager cameras and cables will work for the GS3 2630 Display, but a different adapter harness is needed. Note: One video trigger can be activated using the GS3 2630 Display. |
|
|
Parts for S-Series Combines (GS3 used as video display) |
||||||||
|
|
SWCEC25 – 25-ft extension SWCEC50 – 50-ft extension |
SWTY26845 Adapter harness – CommandARM location |
||||||
|
Option 3: MY17- and Newer Combines Camera Ready |
|
The camera ready feature is optional on all MY17 and newer S-Series combines. This option provides factory-installed observation camera harnesses and brackets in the grain tank, on the unloading auger and at the rear of the combine. The cameras to complete this option must be ordered from parts. There are three options for cameras including the OEM option (Motec Camera) and two aftermarket options from Voyager and A&I Products. Click here for A&I Products brochure. The connecter on the combine is a Motec connector. See below for part numbers. |
|
Camera locations and harnessing on S-Series Combines
Showing 3 camera locations |
||||
|
|
ü Unloading auger ring – AH217774 (Instruction – AH1211760) ü Use U-clamp for rear beacon ü Use Velcro for grain tank cover camera |
|||
|
Showing 3 wiring harness routings |
|||
|
|
|||
|
|
Order information
|
Part |
|
Pkg. |
|
4-Series Sprayers |
||
|
SWVCMS155B |
Voyager camera w/mounting bracket |
1 |
|
SWCEC25 |
Extension harness, 25-ft |
1 |
|
SWCEC50 |
Extension harness, 50-ft |
1 |
|
SWTY26989 |
Adapter harness |
1 |
|
6R Series Tractors |
||
|
SWVCMS155B |
Voyager camera w/mounting bracket |
1 |
|
SWTY27027 |
Harness kit, camera |
1 |
|
SWTY27028 |
Harness, camera implement |
1 |
|
7R, 8R, 8RT, 9R, 9RT Series Tractors |
||
|
SWVCMS155B |
Voyager camera w/mounting bracket |
1 |
|
SWCEC25 |
Extension harness, 25-ft |
1 |
|
SWTY26834 |
Adapter harness |
1 |
|
SWTY26845 |
GreenStar adapter harness |
1 |
|
S-Series Combines |
||
|
SWVCMS155B |
Voyager camera w/mounting bracket |
1 |
|
SWCEC25 |
Extension harness, 25-ft |
1 |
|
SWCEC50 |
Extension harness, 50-ft |
1 |
|
SWTY26834 |
Adapter harness |
1 |
|
SWTY26845 |
GreenStar adapter harness – CommandARM |
1 |
|
S-Series Combines Camera Ready (MY17-) |
||
|
OEM Option (Motec Cameras) |
||
|
AXE41697 |
Single Camera |
1 |
|
KXE10433 |
Kit: Includes three Motec cameras, hardware, and instructions |
1 |
|
Aftermarket Option (Voyager Cameras) |
||
|
SWVCMS155JD1 |
Kit: Includes one Voyager camera, bracket, and Motec adapter cable |
1 |
|
SWVCMS155JD3 |
Kit: Includes three Voyager cameras, brackets, and Motec adapter cables |
1 |
|
SWVCMS155BRK |
Camera bracket |
1 |
|
SWVCMSADPTR |
Motec cable adapter |
1 |
|
Aftermarket Option (A&I Products) |
||
|
A-MC110S |
Kit: Includes one A&I Products camera, bracket and Motec cable |
1 |
|
A-PVC20S |
20’ Extension Cable (for relocating camera) |
1 |
|
APVC65S |
65’ Extension Cable (for relocating camera) |
|