Features and Benefits: Tractor ROPS
2-POST FOLDABLE ROLL-GARD (ROPS) FIELD INSTALLED KITS FOR NON-CURRENT ROW-CROP TRACTORS
Foldable ROPS are available to convert non-current row-crop tractors to a 2-post foldable ROPS. The foldable ROPS for row-crop tractors offer operator rollover protection with enhanced flexibility and convenience to match specific customer requirements.
The kit includes foldable ROPS structure, mounting hardware, and seat belt. Rigid, non-foldable ROPS will continue to be available for use with canopy or where there are no low-clearance areas.
Allows tractor access to low-clearance areas. Removing two pins permits the ROPS to be folded to the rear of the tractor. Folds down to a height below that of the steering wheel.
CAUTION: |
The ROPS must be placed in the upright and locked position when low clearance is not required. For maximum operator protection, the operator must wear the seat belt when the ROPS structure is in the upright position. |
Application/Height
RE58257 |
2510, 2520, 3010, 3020, 4000, 4020, |
|
||||
|
4320 Row-Crop Tractors (No Hi-Crop) |
|
||||
|
Upright position |
70.1 inches (1780mm) |
|
|
||
|
Folded position |
46.3 inches (1175mm) |
|
|
||
NLA |
4030 Row-Crop Tractor (No Hi-Crop) |
|
||||
|
Upright position |
70.1 inches (1780mm) |
|
|
||
|
Folded position |
46.3 inches (1175mm) |
|
|
||
NLA |
4230 Row-Crop Tractor (No Hi-Crop) |
|
||||
|
Upright position |
72.1 inches (1830mm) |
|
|
||
|
Folded position |
48.3 inches (1225mm) |
|
|
||
NLA |
4430 Row-Crop Tractor (No Hi-Crop) |
|
||||
|
Upright position |
74.4 inches (1890mm) |
|
|
||
|
Folded position |
50.6 inches (1285mm) |
|
|
||
NLA |
4040 Row-Crop Tractor (No Hi-Crop) |
|
||||
|
Upright position |
70.1 inches (1780mm) |
|
|
||
|
Folded position |
46.3 inches (1175mm) |
|
|
||
NLA |
4240 Row-Crop Tractor (No Hi-Crop) |
|
||||
|
Upright position |
74.4 inches (1890mm) |
|
|
||
|
Folded position |
50.6 inches (1285mm) |
|
|
||
NOTE: |
Locking kits are available to bolt foldable ROPS upright. The kits are required to secure foldable ROPS when a canopy is attached and to eliminate possible rattle of loose-fitting, removable pins. Order RE58193 Kit. Contains two bolts, two nuts, two washers, and instructions. |
|||||
Order
individual parts as follows for 4030 Row-Crop Tractor (No Hi-Crop):
Order
individual parts as follows for 4230 Row-Crop Tractor (No Hi-Crop): Order
individual parts as follows for 4430 Row-Crop Tractor (No Hi-Crop): Order
individual parts as follows for 4040 Row-Crop Tractor (No Hi-Crop): Order
individual parts as follows for 4240 Row-Crop Tractor (No Hi-Crop): |
||||||
TrACTOR ROPS INFORMATION
PART |
AFFECTED |
|
|
RIGID ROPS FOR ROW-CROP TRACTORS |
|
||
AR51416 |
2510, 2520, 3010, 3020, 4000, 4010, 4020 and 4320 |
|
|
NLA |
4030 |
|
|
NLA |
4230 (Click here to order individual parts.) |
|
|
NLA |
4430 (Click here to order individual parts.) |
|
|
4040 (Click here to order individual parts.) |
|
||
NLA |
4240 (Click here to order individual parts.) |
|
|
AR44707 |
2510, 2520, 3010, 3020, 4010 and 4020 HI-CROP MODELS |
|
|
AR50534 |
4520 and 4620 |
|
|
NLA |
5010, 5020 and 6030 |
|
|
FOLDABLE ROPS FOR ROW-CROP TRACTORS |
|||
RE58257 |
2510, 2520, 3010, 3020, 4000, 4010, 4020 and 4320 |
||
NLA |
4030 (Click here to order individual parts.) |
|
|
NLA |
4230 (Click here to order individual parts.) |
||
NLA |
4430 (Click here to order individual parts.) |
||
NLA |
4040 (Click here to order individual parts.) |
||
NLA |
4240 (Click here to order individual parts.) |
||
FOLDABLE ROPS FOR UTILITY TRACTORS
AL70191 |
820, 920, 1020, 1120, 1520, 2020, 2120, 830, 1030, 1530, 1630, 1830, 2030, 2630, 1040, 1140, 1640, 1840, 2040, 2240, 2440,**2640,** 1250*, 1450, 1650, 2150, 2350, 2550 w/collar shift transmission and 2155 and 2355 **2440 and 2640 tractors equipped with axle housings marked R71486 will require the AL68748 ROPS kit. *Requires the following: (4) R76523 Straps, (4) L55141 screws |
AL68748 |
2130, 2140, 2550 w/TSS transmission, 2750, 2555 and 2755 with low platform |
AL68750 |
2140, 2750 and 2755 with high platform |
AL68752 |
2840, 2940, 2950, 2955, 3130 and 3140 |
PART |
AFFECTED |
RIGID ROPS FOR COMPACT UTILITY TRACTORS |
|
NLA |
650 |
NLA |
650 high roll-gard |
NLA |
750 |
NLA |
750 high roll-gard |
NLA |
850 |
NLA |
850 high roll-gard |
NLA |
950 |
NLA |
950 high roll-gard |
NLA |
1050 |
NLA |
1050 high roll-gard |
NLA |
900HC |
AM103728 |
655, 755, 855 and 955 |
AM876935 |
670 and 770 |
AM877632 |
870 and 970 |
AM877307 |
1070 |
CANOPY FOR ROPS
*AR51452 |
2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4520, 4620, 4630, 5010, 5020 & 6030 - steel *Muffler extension required |
|
|
ROPS kits include: rollover protective structure, seatbelt, and mounting hardware. |
Last modified: 27Apr15..