Tillage parts

Features and benefits

Ripper points, LaserRip™ II

LaserRip™ II ripper points

 

John Deere is pleased to offer wingless. 5-in., 7-in., and 10-in. LaserRip II ripper points. The LaserRip II points are stronger, more durable than our current line of heavy-duty LaserRip ripper points. John Deere’s LaserRip ripper points provide 31% more fracturing and 5% less draft than DMI points, making ours the best point on the market. 

The ripper points are designed to keep customers in the field longer for enhanced productivity. The newly designed LaserRip II ripper points expand your all-makes opportunities with the ability to fit more competitors’ machines, and assist you in growing your business

C:\Documents and Settings\dy03156\My Documents\My Pictures\My Pictures\JD Pictures\N400765.jpg

LaserRip II ripper point

N400763 – wingless

N400764 – 5-in. wing width

N400765– 7-in. wing width

N400766– 10-in. wing width

 

LaserRip II ripper points values

·         Extended life:  added material on top of point for extended life – the nose has two angles-The one closer to the tip helps reduce draft and increase vertical force.  The one towards the back of the point reduces draft, increases vertical force and rupture

·         Improved penetration: Wings have been moved back to help improve rupture. top-plated wings for improved penetration into hard ground

·         Bolt protection: patented, enlarged mounting hole for bolt head protection and retention

·         Stronger material: single-piece cast of patented carbidic austempered ductile iron, and has outstanding abrasion and impact resistance characteristics 

·        All makes versatility: the LaserRip II ripper points designed to fit John Deere machines as well as competitive machines such as Krause, Wil-Rich and Landoll with front-mounting hole.  For CNH/DMI/Brillion machines we have LaserRip II ripper points with rear-mounting hole.

 

The existing LaserRip Extreme points are replaced by the LaserRip II ripper points

LaserRip II Points to fit 1¼-in. Standard for John Deere (Front mounting hole)

Existing LaserRip Extreme

part numbers

LaserRip II

part numbers


Size

N238626

N400763

Wingless

N238627

N400764

5-in.

N238628

N400765

7-in.

N238629

N400766

10-in.

N236310

N238629

10-in.

 

LaserRip II Points to fit 1¼-in. Standard for CNH/DMI/Brillion (Rear mounting hole)

Part

number

Description

N401043

Wingless LaserRip II Point (CNH/DMI/Brillion)

N401044

7-in. LaserRip II Point

(CNH/DMI/Brillon)

 

 

 

 

Compatibility of the Laser Rip Extreme points         

Note: For machines with 1-1/4-in. parabolic standards

Brand

Model

Attaching parts

John Deere

22B, 913, and 915 V-rippers, 955 Row-Crop Ripper, 510 and 512 Disk Rippers, 2700 Mulch Ripper, 2100 Min-Till Ripper

19H3619-bolt, E62934-nut

 

Brillion

Land Commander 2, Soil Commander 2, Zone Commander

19H3619-bolt, E62934-nut

 

CNH

Ecolo Tiger Series

MRX690 w/ 1-1/4-in. shanks

19H3619-bolt, E62934-nut

 

DMI

Ecolo-Tiger Series w/ 1-1/4-in. shanks: 527B, 530B, 730B, 9300, and 2500

19H3619-bolt, E62934-nut

 

Krause

Dominator

19H3619-bolt, E62934-nut

Krause

TL3000

34H356, 3/8-in. x 2 1/4-in.

split-roll pin

 

Landoll

2210 Weatherproofer

2320 Weatherproofer II

34H356, 3/8-in. x 2 1/4-in.

split roll pin

 

New Holland

ST Series w/ 1-1/4-in. shanks

19H3619-bolt, E62934-nut

 

Wil-Rich

357 - Parabolic 1-1/4-in. without wear shin

957 - Parabolic 1-1/4-in. without wear shin

19H3619-bolt, E62934-nut

19H3619 - flange cap screw, grade 8, 1/2-in x 1-3/4-in.

 

E62934 - flange lock nut, 1/2-in

 

 

IMPORTANT!  Installation Instructions

Installation of the points will be slightly different than the existing LaserRip points due to the patented design of the enlarged mounting hole for bolt head protection and retention. Below is the direct-link to the recommended instruction guidelines for the LaserRip II ripper points.

 http://dlrdoc.deere.com/ag_ii/des_moines/N301639_19_22AUG05.pdf

 

Order information

Part
number


Description

Pkg.
qty.

Front-mounting hole-John Deere, Krause, Landoll, Wil-Rich

N400763

Wingless. LaserRip II ripper point for 1-1/4-in. parabolic standard

1

N400764

5-in. LaserRip II ripper point for 1-1/4-in. parabolic standard

1

N400765

7-inLaserRip II ripper point for 1-1/4-in. parabolic standard

1

N400766

10-in. LaserRip II ripper point for 1-1/4-in. parabolic standard

1

Rear-mounting hole-CNH/DMI/Brillion

N401043

Wingless. LaserRip II ripper point for 1-1/4-in. parabolic standard

1

N401044

7-inLaserRip II ripper point for 1-1/4-in. parabolic standard

1

 

Return to top

 

Last modified: 8Nov11.